Microporous Titanium Filter Cartridge

Name: Microporous Titanium Filter Cartridge
Brand: TOPTITECHS
SKU: TT-4768
Availability: InStock

Microporous titanium filter cartridges, 0.2–1 µm ultra-fine rating for high-purity gas and liquid filtration. Corrosion-resistant, reusable.

Products Specifications

For the most demanding filtration, our microporous titanium filter cartridges achieve ratings down to 0.2 µm while retaining the strength and cleanability of sintered metal. They are specified in semiconductor wet processing, ultra-pure steam filtration, fine chemical, and high-purity gas applications where contamination control is critical.

1Product Overview

2Material & Manufacturing

Titanium combines an outstanding strength-to-weight ratio with excellent corrosion resistance in oxidizing, chloride-rich, and acidic environments. The passive oxide film that forms naturally on its surface self-repairs when scratched, which is why titanium components are specified in marine, chemical processing, and electrochemical applications where stainless steel fails prematurely. Grades commonly supplied include commercially pure GR1, GR2, and alloyed GR5 (Ti-6Al-4V), each balancing formability, strength, and weldability for different duty cycles.

At TOPTITECHS, every titanium product is manufactured from certified mill material with full traceability to the original ingot. Dimensional inspection, surface finish control, and mechanical testing follow ASTM standards relevant to the product form, so the delivered component matches the drawing and the datasheet. This material governance is the foundation of consistent performance in demanding service.

3Key Features

✔ Filtration rating 0.2–1 µm
✔ High-purity GR1 titanium
✔ Excellent cleanability
✔ Corrosion and heat resistant
✔ Custom end connections

4Specifications

Material	GR1 titanium
Filtration rating	0.2–1 µm
Applications	Semiconductor, steam, high-purity gas
Form	Cartridge / element

5Typical Specifications in Service

Typical specifications for this product include Material of GR1 titanium; Filtration rating of 0.2–1 µm; Applications of Semiconductor, steam, high-purity gas; Form of Cartridge / element. Custom values within these ranges are produced to order, and every unit is individually inspected before dispatch.

6Applications

Semiconductor wet processing, ultra-pure steam and gas filtration, fine chemicals, and high-purity water treatment.

7Where This Product Fits

In liquid filtration duty, this element removes particulates down to the rated micron level while maintaining high flow and low pressure drop, and its rigid sintered structure backwashes clean for repeated use — a critical advantage over disposable cartridges in continuous processes. Typical duties include polymer melt filtration, chemical and pharmaceutical clarification, and compressed gas filtration where the element must survive high temperature or aggressive media.

In gas service, the same element serves as a sparger, vent filter, flame arrestor, or fluidizing medium. The controlled pore network distributes gas evenly across the surface, producing fine bubbles for aeration, protecting downstream equipment from particulate carryover, and equalizing pressure in storage tanks without admitting contaminants.

How to select: choose pore rating by the smallest particle that must be removed; balance flow requirement against pressure drop using permeability data; confirm media compatibility with the process fluid and temperature; and specify end fittings (thread, flange, ferrule) and dimensions to match the housing. Our engineers can size the element from your flow and viscosity data.

8FAQ

What is the difference between pore size and filtration rating?

Pore size (measured by bubble point, ASTM E128) is the largest pore throat; the filtration rating is the particle size retained at a defined efficiency. For absolute-rated filtration, specify the required rating and we match the pore structure accordingly.

Can the element be cleaned and reused?

Yes. Backwashing with clean solvent or ultrasonic cleaning restores flow; steam sterilization (to 134 °C) is compatible for pharmaceutical duty. Expected service life is typically several years with proper cleaning cycles.

Can 0.2 µm titanium filters be sterilized?

Yes — they withstand autoclaving and high-temperature sterilization cycles.

Get a Quote: As a Baoji-based titanium manufacturer with ISO 9001 quality control, TOPTITECHS supplies Microporous Titanium Filter Cartridge (0.2–1 µm, Ultra-Fine) and other sintered metal components worldwide. Contact us for samples, custom sizes, and volume pricing.